位置:首页>>产品中心>>>>VILVA-EVD1000V/CCS2直流欧标充电桩测试仪

规格参数

VILVA-EVD1000V/CCS2直流欧标充电桩测试仪

产品类别:充电桩测试系列

产品规格:VILVA-EVD直流充电桩测试装置

产品简述:VILVA-EVD直流充电桩测试装置,具有国标互操性规范测试、通讯协议一致性测试功能。主要应用于直流充电桩满负载检测需要,是生产车间、实验室、安装调试、维修后充电桩、升级改型后充电桩的各项性能测试、通信协议测试。

咨询热线:18128682585

一、产品简介

1、产品名称:欧标直流充电桩测试装置

2、型号:VILVA-EVD1000V-CCS2

3、尺寸560*350*230mmW*D*H

4、外观颜色:橙色

5、额定电压:1000V

6、额定功率:无内置负载(支持外部负载设备250A

7、供电方式:220V/50HZ欧标插头

8、散热方式:强制风冷

9、工作环境:-10~+50℃干燥,通风良好

10、枪座数量:1(欧标1000V-200A

11、通讯接口:方口USB

12、显示方式:  7寸触摸屏

13、操作方式:触控屏控制及上位机

14、移动方式:20寸拉杆箱

15、输入方式:单枪充电

16、产品特点:通过读写EVCC(电动汽车内的通讯控制器)对欧标充电桩进行数据检测

 

Product Introduction

1、Product name: European standard DC charging pile test devic

2、Model:VILVA-EVD1000V-CCS2

3、Dimension:560*350*230mm(W*D*H)

4、Color outside:Orange (Other Colors can be optional)

5、Rated voltage:1000V

6、Power rating:No built-in load (support external load equipment ≤250A)

7、Power supply: 220V/50HZ European standard plug

8、Cooling method: forced air cooling

9、Working environment: -10~+50℃ dry, good ventilation

10、Number of gun seats: 1 (European standard 1000V-200A)

11、Communication interface: square port USB

12、Display: 7-inch touch screen

13、Operation mode: touch screen control and host computer

14、Transportation: 20-inch suitcase

15、Input method: single gun charge

16、Product features: Read and write EVCC (communication controller in electric vehicles) to detect data of European standard charging piles

二、产品功能

1、用于欧美标直流充电桩产品的在线调试,下线检测、老化、功能验证。

2实时检测充电桩CP电压、占空比、频率。

3判断CP状态,CP电压、占空比、频率是否在合格范围,并判断提示。

4检测并判断PP电阻值是否正常。

5充电电压、电流、功率,充电时间测试和显示。

6、具有CP断线,CP接地等故障模拟功能

7、开放Modbus通信协议,支持远程通信控制。

Product function

1、It is used for online debugging, offline testing, aging and functional verification of European and American standard DC charging pile products.

2、Real-time detection of charging pile CP voltage, duty cycle and frequency.

3、Judge the CP status, whether the CP voltage, duty cycle and frequency are within the qualified range, and judge and prompt.

4、Detect and judge whether the PP resistance value is normal.

5、Charge voltage, current, power, charge time test and display.

6、It has CP line break, CP grounding and other fault simulation functions

7、Open Modbus communication protocol, support remote communication control.